Patrisa Nail Acrylic Powder Soft, 30g (super shallow, transparent)

Acrylic powder Soft is an ultra-fine polymer transparent powder, thanks to which it is possible to build and strengthen nails.

The main feature of Soft powder is its unique fine grinding and crystal transparency, which makes it even more convenient to use it now.

There are several ways to work with acrylic powder:

Method 1: strengthen the nail plate by sprinkling acrylic powder on the unsaturated base, then polymerizing the material in the lamp.

Recommendation for use:

1. Prepare the nail plate. Plant a base, do not dry.

2. Sprinkle acrylic powder on the unsweetened base. Give 3-5 seconds to the powder to "soak up the base". Polymerize in a UV / LED lamp for 2min / 30sec, wipe off excess with a soft manicure brush / brush. If necessary (for a more uniform overlap of color), apply a base with easy alignment.

3. Apply a color coating and execute the conceived design. Polymerize in a UV/LED lamp for 2min/30sec. Then cover with a top. Polymerize in UV/LED lamp 2min/

Method 2: fully simulate the lower forms using acrylic liquid (monomer) without the use of UV/LED radiation.

Recommendations for use:

1. Dip a pre-cleaned brush into a container with acrylic liquid, if necessary, remove excess on the edges of the container or a lint-free napkin.

2. Dip the tip of the brush in acrylic powder, give the material time to soak (5-7 seconds).

3. Evenly distribute the material on the pre-prepared nail plate.

4. If necessary, you can moisten the brush in acrylic liquid again and correct the irregularities (this manipulation can increase the drying time and solidification of the material).

5. File the material.

6. Depending on the idea to perform the coating and design, cover with a top.

Thanks to the liquid, the acrylic powder becomes plastic and pliable, allowing you to work comfortably in the technique of acrylic extension.

-Has excellent adhesion and has good adhesion to the nail plate;

-Does not give a yellow tint to the powder;

-The use of a primer is recommended.

The composition has a characteristic smell and a certain curing time.

Acryl-Liquid begins to solidify already at the 70th second. Complete drying (depending on the amount of material taken) occurs about 5-6 minutes.

*After using the acrylic system, do not forget to thoroughly rinse the brush, otherwise it may dry out and become unusable.

First, rinse the brush in an acrylic liquid, and then in a degreaser.